Items in Cart 0   Cart Total : US$0.00

You must hit the "Order Selected Products" button to add selected items to your cart.
 
Tools for Powered Saw Cutting your own Coils
Before you buy please read this link - FAQ about power saw cutting your own rings.
All of our arbors are professionaly made for us. The design of the blade mount and cap allow for any small saw cut particles to not interfere with blade alignment. These are the same arbor that are used for TRL saw cut rings - they have less than 0.001 wobble in our set-up.
Before you buy please read this link - FAQ about making your own rings versus buying pre-made rings.
Arbors will NOT FIT in a PADDED ENVELOPE

Please Note: Arbors used in a custom made saw cutting rigs are not warranteed - it is more likely the custom rig causes an issue than these arbors. Power sawing your owns rings does involve dangers - if you are making your own saw cutting set up please do all possible to stay safe! Even good blades in a good set up can "explode", fingers can slip so guards are needed, metal particles become airborn etc. Your saw cutting rig is your setup not ours - we accept no liability for any customers saw cutting setups. Stay safe!
Usually Ships in 1-2 Business Days
Min. Purchase (per option): 1 Each
KXARBOR3/8X3/8
 
Arbor for 3/8'' ID Jewelers Slotting Saw Blade
KXARBOR3/8X3/8
US$32.50
Show Discounts  Show Discounts
Size: Shank fits a 3/8" chuck.
Face of the arbor is 3/4'' diameter.
Stock: 27 Each   (0.25 lbs / Each)
Special Notes: Holds blades with a 3/8" hole
The blades used with this arbor are the KXJRBLADE8
Arbors used in a custom made saw cutting rigs are not warranteed - it is more likely the custom rig causes an issue than these arbors.
US$32.50
Show Discounts  Show Discounts
Size: Shank fits a 3/8" chuck.
Face of the arbor is 3/4'' diameter.
Stock: 27 Each   (0.25 lbs / Each)
Special Notes: Holds blades with a 3/8" hole
The blades used with this arbor are the KXJRBLADE8
Arbors used in a custom made saw cutting rigs are not warranteed - it is more likely the custom rig causes an issue than these arbors.
KXJRARBOR3/8X5/32
 
Jumpringer Replacement Arbor
KXJRARBOR3/8X5/32
US$35.00
Show Discounts  Show Discounts
This arbor is a replacement arbor for the Jumpringer system
Stock: 16 Each   (0.25 lbs / Each)
Special Notes: The shank is slightly thicker (5/32") than the factory part for added rigidity. It also uses a heavier bolt to hold the end cap. Switching to this arbor will allow you to buy blades that do not have a keyway. Holds blades with a 3/8" hole
The blades used with this arbor are the KXJRBLADE8
Please Note: This arbor is meant to be used with a dremel or Forum flex shaft. It is NOT intended to be used with a drill or other more powerful set up. If you use this in a more powerful set up you will shear the thin arbor shank right off. Arbors used in a custom made saw cutting rigs are not warranteed.
US$35.00
Show Discounts  Show Discounts
This arbor is a replacement arbor for the Jumpringer system
Stock: 16 Each   (0.25 lbs / Each)
Special Notes: The shank is slightly thicker (5/32") than the factory part for added rigidity. It also uses a heavier bolt to hold the end cap. Switching to this arbor will allow you to buy blades that do not have a keyway. Holds blades with a 3/8" hole
The blades used with this arbor are the KXJRBLADE8
Please Note: This arbor is meant to be used with a dremel or Forum flex shaft. It is NOT intended to be used with a drill or other more powerful set up. If you use this in a more powerful set up you will shear the thin arbor shank right off. Arbors used in a custom made saw cutting rigs are not warranteed.
KXJRBLADE8
 
Blade for any Jumpringer - 0.008'' thick
KXJRBLADE8
US$7.45
Show Discounts  Show Discounts
Size: 1.25inch diameter with a 3/8'' keyed hole, 120 teeth, 0.008'' thick
Stock: 217 Each   (0.01 lbs / Each)
Special Notes: High Quality US Made Blade. Made out of M2 high speed steel.
Will cut all softer metals on the jumpringer, and will cut harder materials at an RPM lower than 500.
These blades fit MOST jumpringer systems and knock off brands, not all. You MUST measure your arbor and make sure the description matches what you need.
US$7.45
Show Discounts  Show Discounts
Size: 1.25inch diameter with a 3/8'' keyed hole, 120 teeth, 0.008'' thick
Stock: 217 Each   (0.01 lbs / Each)
Special Notes: High Quality US Made Blade. Made out of M2 high speed steel.
Will cut all softer metals on the jumpringer, and will cut harder materials at an RPM lower than 500.
These blades fit MOST jumpringer systems and knock off brands, not all. You MUST measure your arbor and make sure the description matches what you need.
KXARBOR1/2X3/8
 
Arbor for 1/2'' ID Saw Blades for 3/8'' Chuck
KXARBOR1/2X3/8
US$32.50
Show Discounts  Show Discounts
Size: Shank fits a 3/8" chuck.
Face of the arbor is 1'' diameter.
Stock: 15 Each   (0.25 lbs / Each)
Special Notes: Holds any slotting saw blade with a 1/2" hole.
The blades used with this arbor are the KXSAWBLADE8 or KXSAWBLADE10
Arbors used in a custom made saw cutting rigs are not warranteed - it is more likely the custom rig causes an issue than these arbors.
US$32.50
Show Discounts  Show Discounts
Size: Shank fits a 3/8" chuck.
Face of the arbor is 1'' diameter.
Stock: 15 Each   (0.25 lbs / Each)
Special Notes: Holds any slotting saw blade with a 1/2" hole.
The blades used with this arbor are the KXSAWBLADE8 or KXSAWBLADE10
Arbors used in a custom made saw cutting rigs are not warranteed - it is more likely the custom rig causes an issue than these arbors.
KXSAWBLADE8
 
Jewelers Slotting Saw Blade - 0.008'' thick
KXSAWBLADE8
US$12.90
Show Discounts  Show Discounts
Size: 1.75inch diameter with keyless 1/2'' hole, 160 teeth, 0.008'' thick
The hole DOES NOT have a keyway.
Stock: 185 Each   (0.01 lbs / Each)
Special Notes: High Quality US Made Blade. Made out of M2 high speed steel.
Will cut stainless, titanium, (max 200RPM) and all softer metals.
You can grind these out to fit the AMS.
US$12.90
Show Discounts  Show Discounts
Size: 1.75inch diameter with keyless 1/2'' hole, 160 teeth, 0.008'' thick
The hole DOES NOT have a keyway.
Stock: 185 Each   (0.01 lbs / Each)
Special Notes: High Quality US Made Blade. Made out of M2 high speed steel.
Will cut stainless, titanium, (max 200RPM) and all softer metals.
You can grind these out to fit the AMS.
KXSAWBLADE10
 
Jewelers Slotting Saw Blade - 0.010'' thick
KXSAWBLADE10
US$12.35
Show Discounts  Show Discounts
Size: 1.75inch diameter with keyless 1/2'' hole, 160 teeth, 0.010'' thick
The hole DOES NOT have a keyway.
Stock: 30 Each   (0.01 lbs / Each)
Special Notes: High Quality US Made Blade. Made out of M2 high speed steel.
Will cut stainless, titanium, (max 200RPM) and all softer metals.
You can grind these out to fit the AMS.
US$12.35
Show Discounts  Show Discounts
Size: 1.75inch diameter with keyless 1/2'' hole, 160 teeth, 0.010'' thick
The hole DOES NOT have a keyway.
Stock: 30 Each   (0.01 lbs / Each)
Special Notes: High Quality US Made Blade. Made out of M2 high speed steel.
Will cut stainless, titanium, (max 200RPM) and all softer metals.
You can grind these out to fit the AMS.

Checked to order selected Kx-powerSX (Enter Quantity Above)
Tools for Hand Saw Cutting your own Coils
Usually Ships in 1-2 Business Days
Min. Purchase (per option): 1 Each
KXSXFRAME-ADJ
Adjustable Jewelers Saw
KXSXFRAME-ADJ
US$8.85
Show Discounts  Show Discounts
Log in to request an email when this is restocked. Adjustable
Stock: 0 Each   (0.35 lbs / Each)
Special Notes: These are adjustable and will work with our blades as is.
US$8.85
Show Discounts  Show Discounts
Log in to request an email when this is restocked. Adjustable
Stock: 0 Each   (0.35 lbs / Each)
Special Notes: These are adjustable and will work with our blades as is.
KXSAWBLADE6/0
 
Jewelers Saw Blades 6/0 - 12 blades/pack
KXSAWBLADE6/0
US$0.85
Show Discounts  Show Discounts
Size:0.006'' thick, 104 teeth perinch. Recommended for 22-24g
Stock: 8569 Each   (0.05 lbs / Each)
US$0.85
Show Discounts  Show Discounts
Size:0.006'' thick, 104 teeth perinch. Recommended for 22-24g
Stock: 8569 Each   (0.05 lbs / Each)
KXSAWBLADE4/0
 
Jewelers Saw Blades 4/0 - 12 blades/pack
KXSAWBLADE4/0
US$0.85
Show Discounts  Show Discounts
Size:0.008'' thick, 77 teeth perinch. Recommended for 20-22g
Stock: 10584 Each   (0.05 lbs / Each)
US$0.85
Show Discounts  Show Discounts
Size:0.008'' thick, 77 teeth perinch. Recommended for 20-22g
Stock: 10584 Each   (0.05 lbs / Each)
KXSAWBLADE2/0
 
Jewelers Saw Blades 2/0 - 12 blades/pack
KXSAWBLADE2/0
US$0.85
Show Discounts  Show Discounts
Size:0.010'' thick, 69 teeth perinch. Recommended for 18-20g
Stock: 9197 Each   (0.05 lbs / Each)
US$0.85
Show Discounts  Show Discounts
Size:0.010'' thick, 69 teeth perinch. Recommended for 18-20g
Stock: 9197 Each   (0.05 lbs / Each)
KXSAWBLADE2
 
Jewelers Saw Blades no 2 - 12 blades/pack
KXSAWBLADE2
US$0.85
Show Discounts  Show Discounts
Size:0.013'' thick, 64 teeth perinch. Recommended for 20-16g
Stock: 7418 Each   (0.05 lbs / Each)
US$0.85
Show Discounts  Show Discounts
Size:0.013'' thick, 64 teeth perinch. Recommended for 20-16g
Stock: 7418 Each   (0.05 lbs / Each)

Checked to order selected Kx-handSX (Enter Quantity Above)
Stick Lubricant
Price: US$6.75 /Each
Weight is ~ 0.25 lbs /Each
KXSTICKLUBE Lubricant is required when using a saw cutting set-up - it will extend the life of your blades and make cutting easier. This lubricant is suitable for all metals and is safe, non-toxic, non-allergenic and biodegradable as it is based on vegetable oil. The 2.2Oz stick will last for hundreds of pounds of rings.
Weight is ~ 0.25 lbs /Each
Stock: 52 Each
Usually Ships in 1-2 Business Days
Min. Purchase (per option): 1 Each

Checked to order selected KXSTICKLUBE (Enter Quantity Above)
 

Mini Cart

Your Cart Is Empty

Security Info