Bright Aluminum Wire
Bright aluminum is light, inexpensive and clean for aluminum. Rub-off is always an issue with any uncoated aluminum. Our bright aluminum is diamond drawn to give the cleanest and brightest possible finish - but its still subject to small amounts of grey ruboff. This material can vary in shine as well.

For rings that look like polished silver we recommend you get our Bright Silver Anodized Aluminum. These are consistently shiny and are sealed so they have no rub off.

To see a detailed discussion of Bright Silver AA vs Bright Aluminum have a look at this article on our Forum.
We use hard tempered aluminum and a good alloy to give you good strength. You get 3 times as many rings per lb as steel rings.
The brightness of the rings varies. If you need every ring to have the same shine level you need to learn the art of tumbling.

We offer a taylored selection of sizes for bright aluminum coils. The minimum amount you can buy is listed on the lower right of each wire guage product box below. If you need a smaller amount of a ring or you need a different size please browse our wide selection of rings.
Please read this before you decide to cut your own bright aluminum rings
Cutting rings requires special tools and setups and the costs to cut only a few rings are higher. I highly recommend you read the following 2 FAQ posts before deciding to cut your own rings
How to use a Jumpringer type tool (aka Pepe, Koil Kutter, etc)
Making vs Buying rings - Bottom line is we have a business making rings in large amounts at great prices. The vast majority of the time it doesn't pay to make your own rings - and you will get better cuts buying pre-made.

For extreme details on all materials and comparisons please click to see our materials page!