With a Jewelry Welder you can make make heirloom quality jewelry that will last for generations without a single ring opening (when done correctly of course). You can also make designs that are not feasible with butted chainmail - for example 24g 1/8" Euro 4 in 1 bracelet goes from a flimsy piece of garbage to a light, lacy yet strong piece of jewelry.
You can also use this welder to polish the ends of wire to make balls - for example the niobium earwires in the image. (Click the image to see a large version)
This system can weld stainless steel, titanium, silver (fine and sterling), gold and bronze. Its also possible to weld brass and nickel silver with a bit more work. Copper and aluminum are not practical for pulse arc welding.
Recommended for 0.032’’ and smaller. It works great on 0.080'' wire and smaller but multiple welds are required.
The welder is designed to be used as you weave while maintaining close to your same weaving speed.
These welders are capable of making pretty welds you cannot see (unlike resistance welding).
Rings will typically be discolored during welding and finished pieces should be cleaned with a tumbler.
We have created a FREE handy PDF to give you the basics on how this system works. This insert is available to download now.Click here to see this PDF now.
Click in the image on the left to see an extreme close up larger version.
You must hit the "Order Selected Products" button to add selected items to your cart.