NOTE!!! You MUST upload your image after you place your order at this link (include your order number and email address): https://theringlord.com/laser-etch-upload/
**If you want the etching on the concave (inside) of the scales please EMAIL customer service with your order number immediately. The email is orders@theringlord.com.
) <-- convex side only (outside cupping) THIS IS THE DEFAULT IF YOU DO NOT SPECIFY WE WILL ETCH CONVEX SIDE
( <-- concave side only (inside curve)
For etched both sides please also purchase the product listed below called "Second Side Etch." The cost of the 2nd side is 60% of the price of the item - this will automatically add correctly to the cart.
) <-- convex side only (outside cupping) THIS IS THE DEFAULT IF YOU DO NOT SPECIFY WE WILL ETCH CONVEX SIDE
( <-- concave side only (inside curve)
For etched both sides please also purchase the product listed below called "Second Side Etch." The cost of the 2nd side is 60% of the price of the item - this will automatically add correctly to the cart.
Size: 7/8" x 1.41" with 0.35" hole (22.2mm x 35.8mm,8.9mm hole)
Standard Pattern Notes: You MUST use the correct ring size for this pattern - either Split Rings for large scales below or any 16g 5/16" ring.
You will need 300 scales per sq ft and 2 rings per scale.
Standard Pattern Notes: You MUST use the correct ring size for this pattern - either Split Rings for large scales below or any 16g 5/16" ring.
You will need 300 scales per sq ft and 2 rings per scale.
Punched from 1/2 hard temper anodized strip (anodized the same both sides unless noted). The sides of the scales are not anodized. Thickness is 0.03" unless noted. You can mix a fatter with a thinner scale.
If you order these custom laser etched items with other items, your entire order will be held until it can ship together!
All colors may not be available.
