* 3lb. capacity tumbler.
* One 3lb rubber barrel approx 5'' diameter by x 4'' long
* 115V continuous duty motor - motor is overload protected (the motor can't draw enough current to damage itself).
Weight = 5.5 lb
|
Stock: 13 Each
Usually Ships in 1-2 Business Days
|
|
|
* 9 lb capacity
* 115V Large continuous duty fan-cooled motor. Thermally protected motor will automatically shut off if it gets to hot and will turn itself back on when it has cooled off. Barrel is approx 8'' diameter by x 4.5'' wide
Weight = 7 lb
One 9lb rubber barrel.
* Can also be used with the 3lb rubber barrels
|
Stock: 12 Each
Usually Ships in 1-2 Business Days
|
|
|
This is the smaller version of of a vibratory tumbler we have used extensively for the past 3 years with great results. Perfect for the chainmailer who needs several batches of tumbling per day. Only for use with walnut and corncob media.
* Removable Heavy Polyethylene Bowl With Lid
* Ball Bearing motor operates on 115 volts and is overload protected (the motor can't draw enough current to damage itself).
* 10 lb or 3 quart capacity.
* Vibrates at 3000 vibrations per minute
* Mass creates a cyclonic effect, moves around the bowl and down into the center.
* Dimensions: 10" diameter x 11" high.
Weight = 8 lb
|
Stock: 10 Each
Usually Ships in 1-2 Business Days
|
|
|
The industrial version has a larger motor, heavier springs and more support for the bowl than the UV-10 Regular. It's designed for heavy use for many years. This is the tumbler for you if you do a lot of tumbling and want a tumbler you'll never need to replace.
* Removable Heavy Polyethylene Bowl With Lid
* Ball Bearing motor operates on 115 volts.Thermally protected motor will automatically shut off if it gets to hot and will turn itself back on when it has cooled off.
* 10 lb or 3 quart capacity.
* Vibrates at 3000 vibrations per minute
* Mass creates a cyclonic effect, moves around the bowl and down into the center.
* Dimensions 10" diameter x 11" high
Weight = 10 lb
|
Stock: 4 Each
Usually Ships in 1-2 Business Days
|
|
|
Can be used on either the Model T or the AR-6 tumbler
Shown in the picture for the Model T Rotary Tumbler
Weight = 1 lb
|
Stock: 3 Each
Usually Ships in 1-2 Business Days
|
|
|
Non-Magnetic alloy 304 Stainless Steel
Perfect for burnishing.
Pins are 0.08'' (2mm) wire diameter and 1/4'' long. The pins are cut at 45° so the pins get into tight spots are are more effective.
Bag weighs 0.5 lbs
|
Stock: 925 bag
Usually Ships in 1-2 Business Days
|
|
|
Non-Magnetic alloy 304 Stainless Steel
Perfect for burnishing.
Pins are 0.08'' (2mm) wire diameter and 1/8'' long. The pins are cut at 45° so the balls get into tight spots are are more effective.
Bag weighs 0.5 lbs
|
Stock: 903 bag
Usually Ships in 1-2 Business Days
|
|
|
Great for heavy deburring and burnishing.
Pins are 0.028'' diameter and 1/4'' long made from 410 magnetic stainless (which means you can get it wet without rust)
Pins are easy to separate with a sieve or magnet.
Bag weighs 0.1 lbs
|
Stock: 403 bag
Usually Ships in 1-2 Business Days
|
|
|
Great for heavy deburring and burnishing.
Discs are 0.22''diameter and 0.015'' thick made from 410 magnetic stainless. (which means you can get it wet without rust)
Discs are easy to separate with a magnet.
|
Stock: 8 lb
There are approx. 5900 pieces per lb
Usually Ships in 1-2 Business Days
|
|
|
Great for heavy deburring and burnishing.
Discs are 0.25''diameter and 0.03'' thick made from 410 magnetic stainless. (which means you can get it wet without rust)
Discs are easy to separate with a magnet.
|
Stock: 54.25 lb
There are approx. 2000 pieces per lb
Usually Ships in 1-2 Business Days
|
|
|
Great for heavy deburring and burnishing.
Discs are 0.35'' diameter and 0.025'' thick made from 410 magnetic stainless. (which means you can get it wet without rust)
Discs are easy to separate with a magnet.
|
Stock: 176.75 lb
There are approx. 1500 pieces per lb
Usually Ships in 1-2 Business Days
|
|
|
Great for heavy deburring and burnishing.
Discs are 0.22'' diameter and 0.015'' thick made from 1075 steel. (Will rust if wet)
Discs are easy to separate with a magnet.
|
Stock: 12.25 lb
There are approx. 5900 pieces per lb
Usually Ships in 1-2 Business Days
|
|
|
Great for heavy deburring and burnishing.
Discs are 0.25'' diameter and 0.03'' thick made from 1075 steel. (Will rust if wet)
Discs are easy to separate with a magnet.
|
Stock: 0 lb
There are approx. 2000 pieces per lb
Usually Ships in 1-2 Business Days
|
|
|
Great for heavy deburring and burnishing.
Discs are 0.35'' diameter and 0.025'' thick made from 1075 steel. (Will rust if wet)
Discs are easy to separate with a magnet.
|
Stock: 45.5 lb
There are approx. 1500 pieces per lb
Usually Ships in 1-2 Business Days
|
|
|
